Skip to content

Cart

Your cart is empty

Fuzion Product Knowledge     |      Section 4: Fortify Colour Construct

Fortify Colour Construct

Construct vs. Colour Construct

"Construct" is a crystal clear gel used for structured gel manicures, and natural nail overlays. It is also an incredible base for your hard gel services to prevent lift, separation, and service breakdown. 

So what then is "Colour Construct"? Colour Construct has the same properties and benefits of regular clear "Construct", but with added colour!

Colour Construct can be used in place of clear Construct in structured gel manicures. However there are some adjustments to technique needed depending on which Colour Construct shade you are using. 
Fall_Fortify_Hero_Cropped_129a6232-1b6d-4fe4-b9c5-7918490a4449

How to use Colour Construct

There are some adjustments needed to applying Colour Constuct depending on which shade you are using. 

Scroll down to find instructions for each different shade of Colour Construct!

Instructions for using Belle, Cari, Georgia, Lana, Sawyer, Whitney, Lacey and Grace

Colour_Construct_Group
Camoflauge Colour Construct Collection
From left to right: Belle, Cari, Georgia, Lana, Sawyer, Whitney, Grace, and Lacey
1. First prep the nail: using a hand file or e-file, remove all shine and debris from the natural nail. File the free edge to your desired shape. Cleanse the nail to remove all dust & oils Apply Bond to the entire surface of the nail. Gently scrub into the surface. Apply 1-2 coats; no cure required. Bond is naturally HEMA Free!
Applying these shades of Colour Construct can be done in 2 ways:

 1. Use a very thin layer of Construct as a base layer under hard gel. You should be able to see texture on the nail. Do not over apply. This will virtually eliminate lifting, separation, and service breakdown on your trouble clients. 

 2. Use Construct to create a simple, durable overlay for your gel manicure. When doing this, apply Construct to the whole nail, then before curing, float a moderate amount of additional Construct to create the structure of the nail. Cure 60s UV/LED.
3. Finish with Fortify Gloss. This tack-free, super shiny topcoat is perfect for both hard gel applications and overlays with Construct. Cure 60s LED, 120s UV.

Instructions for using Earl Grey, Latte, Chai, Caramel Sprinkles, Extra Hot, and Iced

Neutrals_Group
Neutrals Colour Construct Collection
From left to right: Earl Grey, Latte, Chai, Caramel Sprinkles, Extra Hot, and Iced
1. First prep the nail: using a hand file or e-file, remove all shine and debris from the natural nail. File the free edge to your desired shape. Cleanse the nail to remove all dust & oils Apply Bond to the entire surface of the nail. Gently scrub into the surface. Apply 1-2 coats; no cure required. Bond is naturally HEMA Free!
These shades of Colour Construct will need to be applied in thin, firm pressure coats and encapsulated with clear Construct. We do not recommend a floating or building technique with these. 

1. Apply 1-2  thin, firm pressure coats of the colour construct, and cure each for 60s LED/120s UV.

Use clear Construct to build structure and any thickness required.  Cure for 60s LED/120s UV.

*Tip: after you apply clear Construct, tip the hand upside down for 5-10 seconds, then cure for a smooth, file-free application!
3. File if needed and seal with Fortify Gloss. This tack-free, super shiny topcoat is perfect for both hard gel applications and overlays with Construct. Cure 60s LED, 120s UV.

Instructions for using Tiara, First Look, True Love, Champagne, I Do, and Lift the Veil

Wedd_Collection_Group
Wedding Colour Construct Collection
From left to right: Tiara, First Look True Love, Champagne, I Do, and Lift the Veil
1. First prep the nail: using a hand file or e-file, remove all shine and debris from the natural nail. File the free edge to your desired shape. Cleanse the nail to remove all dust & oils Apply Fortify Bond to the entire surface of the nail. Gently scrub into the surface. Apply 1-2 coats; no cure required. Bond is naturally HEMA Free!
Applying these shades of Colour Construct can be done in 2 ways:

 1. Use a very thin layer of Construct as a base layer under hard gel. You should be able to see texture on the nail. Do not over apply. This will virtually eliminate lifting, separation, and service breakdown on your trouble clients. 

 2. Construct to create a simple, durable overlay for your gel manicure. When doing this, apply Construct to the whole nail, then before curing, float a moderate amount of additional Construct to create the structure of the nail. Cure 60s UV/LED.
3. Finish with Fortify Gloss. This tack-free, super shiny topcoat is perfect for both hard gel applications and overlays with Construct. Cure 60s LED, 120s UV.

Instructions for using Amber, Fiona, Layla, Onyx, Tawny, and Willow

Fall_Fortify_Hero_Cropped_129a6232-1b6d-4fe4-b9c5-7918490a4449
Fall Fortify Colour Construct Collection
From left to right: Amber, Fiona, Layla, Onyx, Willow, and Tawny
1. First prep the nail: using a hand file or e-file, remove all shine and debris from the natural nail. File the free edge to your desired shape. Cleanse the nail to remove all dust & oils Apply Fortify Bond to the entire surface of the nail. Gently scrub into the surface. Apply 1-2 coats; no cure required. Bond is naturally HEMA Free!
These shades of Colour Construct will need to be applied in thin, firm pressure coats and encapsulated with clear Construct. We do not recommend a floating or building technique with these.

1. Apply 1-2 thin, firm pressure coats of the colour construct, and cure each for 60s LED/120s UV.

Use clear Construct to build structure and any thickness required.  Cure for 60s LED/120s UV.

*Tip: after you apply clear Construct, tip the hand upside down for 5-10 seconds, then cure for a smooth, file-free application!
3. File if needed and seal with Fortify Gloss. This tack-free, super shiny topcoat is perfect for both hard gel applications and overlays with Construct. Cure 60s LED, 120s UV.

Shop All Colour Construct

Go back to Fortify Product Knowledge